Free Shipping With Orders $55+
EXTRA 15% OFF ANY ORDER — USE: WOW15

SUMMER SALE : SAVE UP TO 85%

Home>mall>Electronics

0Líkaði

2.8 Inch ILI9341 240x320 SPI TFT LCD Display Touch Panel SPI Serial Port Module

4.61100

$10.99 /$13.41

*Name:
*Email:
*Phone:
*Quantity:
*Content:
Attachment:

Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$9.59 /$13.41

Shipping to: United States | Express delivery: 7-12 business days | Standard delivery: 15-25 business days

location

Kaupa núna Bæta í körfu

Kredit- eða debetkort

Örugg greiðsla tryggð

Ókeypis gjöf

Ókeypis gjöf með hverri kaupum

Sendingarstefna

Ókeypis venjuleg sending fyrir pantanir yfir $9.9

Skilastefna

Skilaðar vörur verða samþykktar innan 40 daga frá móttökudegi. Sérsniðnar vörur geta ekki verið skilaðar eða skipt. Vörur keyptar með raftökugjafakorti eru aðeins skiptanlegar; endurgreiðsla á ekki við.

Ókeypis gjöf

Velkomin á Roymall, faglegu vefsíðunni þinni fyrir gjafir úr vöruhúsi. Við metum og þökkum stuðning þinn og viljum sýna þakklæti með því að bæta við áhugaverðum þætti við kaupin þín. Þegar þú verslar hjá okkur færðu ekki aðeins aðgang að vörum í fyrsta flokki sem bæta lífsgæði þín heldur færðu einnig ókeypis gjöf með hverri pöntun. Tilbúin(n) að kanna safnið okkar og finna fullkomnu gjafirnar þínar? Skoðaðu úrval okkar af vörum úr vöruhúsi, pantaðu og bíððu eftir spennunni af ókeypis gjöfinni þinni sem fylgir kaupunum þínum.

Sendingarstefna

Við munum vinna hörðum höndum við að senda þér vörur eftir að hafa móttaka pöntun þína og tryggja að þær komist heil og hrauskar til þín. Sendingarupplýsingar verða í staðfestingarpóstinum þínum.Í flestum tilfellum eru pantanir afgreiddar innan 2 daga. Undir sérstökum kringumstæðum getur það tekið lengri tíma eins og hér segir: Þegar þú pantar á laugardegi, sunnudegi eða á frídögum, gæti það tekið 2 daga lengri tíma.Venjulega þarf 5-7 virka daga (mánudaga til föstudaga) án þess að flugseinkun eða önnur umhverfisþættir hafi áhrif.Þar sem sendingarþjónusta okkar er alþjóðleg mun sendingartíminn ráðast af staðsetningu þinni, svo það gæti tekið nokkurn tíma og vinsamlegast bíðið þolinmóð ef þú ert í afskekktum svæðum eða löndum.

1. Skilastefna

Við tökum aðeins við vörum sem keyptar eru á roymall.com. Ef þú kaupir af staðbundnum dreifingaraðilum okkar eða öðrum söluaðilum geturðu ekki skilað þeim til okkar. Lokasöluvörur eða ókeypis gjafir eru ekki samþykktar til skila.Til að eiga rétt á skilum verður vara þín að vera ónotuð og í sömu ástandi og þú fékkst hana. Hún verður einnig að vera í upprunalegum umbúðum.Eftir að hafa fengið skilaleiðbeiningar frá okkur, vinsamlegast pakkaðu vörunum sem skila á og skilaðu pakkanum á staðbundnu pósthúsi eða öðrum sendingaraðila.
Við munum afgreiða skilaða eða skipta vöru innan 3-5 virkra daga eftir að hún berst til okkar. Endurgreiðsla verður afgreidd og endurgreidd sjálfkrafa á upprunalega greiðslumáta þinn.Engar skil eða skipti eru möguleg ef vara var framleidd sérstaklega, þar á meðal sérstaklega stærð, lit eða prentun.Ef þú þarft meiri hjálp, vinsamlegast hafðu samband við okkur. service@roymall.com eða Whatsapp: +447549870296

2. Endurgreiðslustefna

Þú færð fulla endurgreiðslu eða 100% afslátt í búðina eftir að við höfum móttekið og skoðað skilaða pakkann. Endurgreiðsla verður afgreidd og endurgreidd sjálfkrafa á upprunalega greiðslumáta þinn.Athugaðu að sendingarkostnaður og allar tollgjöld eða gjöld eru ekki endurgreidd. Viðbótar sendingarkostnaður er ekki endurgreiddur þegar pakki hefur verið sendur. Þú berð ábyrgð á að greiða þessi gjöld og við getum ekki veitt undanþágu eða endurgreitt þau, jafnvel þótt pöntunin sé skilað til okkar.Þegar við höfum móttekið og staðfest skilaða vöru þína, sendum við þér tölvupóst til að tilkynna að við höfum móttekið skilaða vöru þína. Við munum einnig tilkynna þér um samþykki eða höfnun á endurgreiðslu þinni.Ef þú átt í vandræðum með endurgreiðsluferlið, vinsamlegast hafðu samband við okkur. service@roymall.com eða Whatsapp: +447549870296

File download: http://files.roymall.com/2017/12/2.8-spi-9341.zip
Specifications:

Type: Touch PanelScreen: 2.8" SPI Serial

Display area: 46(W) X 65(H)mm

Size: 81.7 x 50 mm

Driver element: a-Si TFT active matrix

Pixel arrangement: RGB vertical stripe

Driver IC: ILI9341

Backlight: White LED

Viewing direction: 6 o'clock

Color depth: 262K/65K

Resolution (dots): 240RGB*320Dots

5V compatible, use with 3.3V or 5Vlogic

Need at least 4 IOs from your MCU

With PCB plate (including power supply IC, SD), compatible with 5110 interface

Package included:

1 x 2.8" TFT LCD Display Touch Panel Module1 x Touch Pen

Kaupa með Paypal

Products related to this item

Loading related products...

❮

❯

Videos for similar product

Loading product videos...

❮

❯

Electronics Ranking

More Electronics

2.8 Inch ILI9341 240x320 SPI TFT LCD Display Touch Panel SPI Serial Port Module

Customer Reviews

4.90 out of 5

See all 375 reviews

5 star

2 (100%)
4 star

0 (0%)
3 star

0 (0%)
2 star

0 (0%)
1 star

0 (0%)

Write a Review Get double review points if you are one of the first 3 reviews published!

All Reviews (375)
Image ( 2 )
Video (0)
All Star
- All Star(375)
- 5 Star (2)
- 4 Star (0)
- 3 Star (0)
- 2 Star (0)
- 1 Star (0)

Sort by:

Top Review

Top Review
Most Helpful
Most Recent

Reviews only from your country (United States)

Show Original

A part of the review has been auto-translated.

bandixxl404 VIP1
HU
03/05/2020

Good product. Note: if you use 3.3V supply and 3.3V logic level it works fine, but if both of the supply voltage and the logic level is 5V it will not work. So if you want to use it with a 5V system, the logic levels must be reduced down to about 3V.
I think this part should be included in the description page because the current description is misleading.

Good product. Note: if you use 3.3V supply and 3.3V logic level it works fine, but if both of the supply voltage and the logic level is 5V it will not work. So if you want to use it with a 5V system, the logic levels must be reduced down to about 3V.
I think this part should be included in the description page because the current description is misleading.

Good product. Note: if you use 3.3V supply and 3.3V logic level it works fine, but if both of the supply voltage and the logic level is 5V it will not work. So if you want to use it with a 5V system, the logic levels must be reduced down to about 3V.
I think this part should be included in the description page because the current description is misleading.
Rotate left Rotate right
7

Comments (0)

Show Original
VladoKW VIP5
RO
04/08/2020

Product as description. Tested ok working as expected. Tested the touchscreen and is very accurate after fine tuning of parameters. Need to use the proper library which is easy to find on github. Good product. Recommend.

Product as description. Tested ok working as expected. Tested the touchscreen and is very accurate after fine tuning of parameters. Need to use the proper library which is easy to find on github. Good product. Recommend.

Product as description. Tested ok working as expected. Tested the touchscreen and is very accurate after fine tuning of parameters. Need to use the proper library which is easy to find on github. Good product. Recommend.
Rotate left Rotate right
5

Comments (2)

Show Original

Show:

12...30

Total 0 pages

Go to page

Customer Q&As

Searching for relevant results...

Can't find your answer? Ask a new questionorCustomer Service

Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.

showing 1-30 of 35 |

Show Original

A part of the QA has been auto-translated.

0

Q:
How should I use this display and the available drivers? I've been trying to use it with the Adafruit_ILI9341 library and I only get a white screen.

How should I use this display and the available drivers? I've been trying to use it with the Adafruit_ILI9341 library and I only get a white screen.
How should I use this display and the available drivers? I've been trying to use it with the Adafruit_ILI9341 library and I only get a white screen.

A:

Use short cables for SPI Bus, than it works. Got same Problem and solve this with short cable connection.

Use short cables for SPI Bus, than it works. Got same Problem and solve this with short cable connection.

Answered by DerSommer77 on 05/10/2021Helpful (0)
0

Q:
Does it support reading from screen RAM? Thanks

Does it support reading from screen RAM? Thanks
Does it support reading from screen RAM? Thanks

A:

It isn't double buffered, if that's the question

It isn't double buffered, if that's the question

Answered by roth3ns on 30/11/2020Helpful (0)
0

Q:
Is the screen touch sensitive to fingers?

Is the screen touch sensitive to fingers?
Is the screen touch sensitive to fingers?

A:

it is resistive not capacitive so it needs pressure like your fingernail or a hard stylus.

it is resistive not capacitive so it needs pressure like your fingernail or a hard stylus.

Answered by OLderDan on 23/11/2021Helpful (0)
0

Q:
Is it RoHS compliant ? And if yes where I can find the certificate ?

Is it RoHS compliant ? And if yes where I can find the certificate ?
Is it RoHS compliant ? And if yes where I can find the certificate ?

A:

Hi, Yes it is RoHS compliant according to the manufacturers datasheet

Hi, Yes it is RoHS compliant according to the manufacturers datasheet

Answered by xcomseller on 14/09/2021Helpful (0)
0

Q:
how can I use the touch with a EP32 - is there somewhere an example do use the TFT and the touch with Arduino IDE. In the download file from Banggood I see only a st Board.

how can I use the touch with a EP32 - is there somewhere an example do use the TFT and the touch with Arduino IDE. In the download file from Banggood I see only a st Board.
how can I use the touch with a EP32 - is there somewhere an example do use the TFT and the touch with Arduino IDE. In the download file from Banggood I see only a st Board.

A:

I used the tft-espi library. There are many tutorials online to help.

I used the tft-espi library. There are many tutorials online to help.

Answered by Leon on 07/01/2021Helpful (0)
0

Q:
please, in this is PCB8544 or MI0283QT9A or what ???

please, in this is PCB8544 or MI0283QT9A or what ???
please, in this is PCB8544 or MI0283QT9A or what ???

A:

Verstehe die Frage nicht

Do n't understand the question

Answered by DerSomner77 on 20/08/2021Helpful (0)
0

Q:
Struggling to get this to work with the mega, any instructions or advise?

Struggling to get this to work with the mega, any instructions or advise?
Struggling to get this to work with the mega, any instructions or advise?

A:

Trythis library: ***** and choose PDQ_ILI9341 Load the sample code and there is also a wiring diagram for the mega.

Trythis library: ***** and choose PDQ_ILI9341 Load the sample code and there is also a wiring diagram for the mega.

Answered by BG111045417 on 06/02/2021Helpful (0)
0

Q:
Tested literally everything you can find on google about this screen. ALWAYS WHITESCREEN Adafruit_ILI9341.h graphicstest Serial output is: ILI9341 Test! Display Power Mode: 0x0 MADCTL Mode: 0x0 Pixel Format: 0x0 Image Format: 0x0 Self Diagnostic: 0x0 The screen is just not being recognized. Is this an error with my libraries or is this fking thing just broken? Spent 4h of my life and reached nothing - close to try solving the problem with a hammer.

Tested literally everything you can find on google about this screen. ALWAYS WHITESCREEN Adafruit_ILI9341.h graphicstest Serial output is: ILI9341 Test! Display Power Mode: 0x0 MADCTL Mode: 0x0 Pixel Format: 0x0 Image Format: 0x0 Self Diagnostic: 0x0 The screen is just not being recognized. Is this an error with my libraries or is this fking thing just broken? Spent 4h of my life and reached nothing - close to try solving the problem with a hammer.
Tested literally everything you can find on google about this screen. ALWAYS WHITESCREEN Adafruit_ILI9341.h graphicstest Serial output is: ILI9341 Test! Display Power Mode: 0x0 MADCTL Mode: 0x0 Pixel Format: 0x0 Image Format: 0x0 Self Diagnostic: 0x0 The screen is just not being recognized. Is this an error with my libraries or is this fking thing just broken? Spent 4h of my life and reached nothing - close to try solving the problem with a hammer.

A:

File download: http://files.banggood.com/2017/12/2.8-spi-9341.zip

File download: http://files.banggood.com/2017/12/2.8-spi-9341.zip

Answered by Redolent on 25/12/2019Helpful (0)
0

Q:
can we use arduino with this?? does it have capacitive touch or resistive touch?

can we use arduino with this?? does it have capacitive touch or resistive touch?
can we use arduino with this?? does it have capacitive touch or resistive touch?

A:

Yes,using the SPI interface. Uses capacitive touch.

Yes,using the SPI interface. Uses capacitive touch.

Answered by lmorelli on 17/12/2020Helpful (0)
0

Q:
What is the current drawn by this LCD? 15ma? 50ma? 120ma?

What is the current drawn by this LCD? 15ma? 50ma? 120ma?
What is the current drawn by this LCD? 15ma? 50ma? 120ma?

A:

It 's under 50mA, around 30mA

It 's under 50mA, around 30mA

Answered by kisslorand666 on 08/09/2019Helpful (0)
0

Q:
will this work with NodeMCU esp8266 ?

will this work with NodeMCU esp8266 ?
will this work with NodeMCU esp8266 ?

A:

THedatasheet shows it wil. JUst be sure to connect to a reliable power source.

THedatasheet shows it wil. JUst be sure to connect to a reliable power source.

Answered by lmorelli on 30/12/2021Helpful (0)
0

Q:
What drivers should be used is using this with raspberry pi?

What drivers should be used is using this with raspberry pi?
What drivers should be used is using this with raspberry pi?

A:

should ne usable with a raspberry pi, it's an spi connection. Look at adafruit ILI9341 library, for thé touchscreen not sûre of which library you can use, but look after xpt2046 + raspberrypi on google, i'm quite sure that a library exists already :)

should ne usable with a raspberry pi, it's an spi connection. Look at adafruit ILI9341 library, for thé touchscreen not sûre of which library you can use, but look after xpt2046 + raspberrypi on google, i'm quite sure that a library exists already :)

Answered by elecat on 14/02/2019Helpful (0)
0

Q:
Can you invoice for the product?

Can you invoice for the product?
Can you invoice for the product?

A:

maybe you can contact the customer service.

maybe you can contact the customer service.

Answered by Maskdar on 06/05/2022Helpful (0)
0

Q:
A good tutorial for this with ESP32 or ESP8266? Thank you in advance

A good tutorial for this with ESP32 or ESP8266? Thank you in advance
A good tutorial for this with ESP32 or ESP8266? Thank you in advance

A:

google it, you will find a lot

google it, you will find a lot

Answered by Petroleous on 29/04/2022Helpful (0)
0

Q:
Who has had success using this screen with ESP32? How did you wire it? What libraries and examples were used? Thank you in advance.

Who has had success using this screen with ESP32? How did you wire it? What libraries and examples were used? Thank you in advance.
Who has had success using this screen with ESP32? How did you wire it? What libraries and examples were used? Thank you in advance.

A:

maybe you can find some from youtube

maybe you can find some from youtube

Answered by Pleased on 29/04/2022Helpful (0)
0

Q:
a link where I can see what products you have for sale? thanks.

a link where I can see what products you have for sale? thanks.
a link where I can see what products you have for sale? thanks.

A:

No answer yet.
0

Q:
you have TFT lcd panel model 59.05A03.016

you have TFT lcd panel model 59.05A03.016
you have TFT lcd panel model 59.05A03.016

A:

what is 59.05A03.016?

what is 59.05A03.016?

Answered by Ogive on 22/06/2021Helpful (0)
0

Q:
Is there an eagle lbr file for this tft?

Is there an eagle lbr file for this tft?
Is there an eagle lbr file for this tft?

A:

no eagle lbr file support

no eagle lbr file support

Answered by Snoutwolf23 on 06/01/2021Helpful (0)
0

Q:
Is there an eagle lbr for this product?

Is there an eagle lbr for this product?
Is there an eagle lbr for this product?

A:

Sorry, I didn't need an lbr. File.

Sorry, I didn't need an lbr. File.

Answered by fke on 30/12/2020Helpful (0)
0

Q:
Can this be used on raspberry pi, and if so, how?

Can this be used on raspberry pi, and if so, how?
Can this be used on raspberry pi, and if so, how?

A:

Sure! I bought it to give a monitor to a headless PI and a display to Arduino. The display uses the well-known SPI protocol.

Sure! I bought it to give a monitor to a headless PI and a display to Arduino. The display uses the well-known SPI protocol.

Answered by lmorelli on 18/10/2020Helpful (0)
0

Q:
Is this compatible with pyboard v1 (STM32F405)?

Is this compatible with pyboard v1 (STM32F405)?
Is this compatible with pyboard v1 (STM32F405)?

A:

Ipersonally don't know, but it seems so. Search YouTube for "nterface TFT display with STM32 in parallel mode || CubeIDE || CubeMX || HAL" (I am not allowed to link directly, sorry)

Ipersonally don't know, but it seems so. Search YouTube for "nterface TFT display with STM32 in parallel mode || CubeIDE || CubeMX || HAL" (I am not allowed to link directly, sorry)

Answered by mylists on 12/12/2020Helpful (0)
0

Q:
Good afternoon, do you have a notbuk lg400 screen?

boa tarde , vcs tem tela do notbuk lg400?
Good afternoon, do you have a notbuk lg400 screen?

A:

Iam sorry...I don't understand - I don't speak your language...

Iam sorry...I don't understand - I don't speak your language...

Answered by mylists on 12/12/2020Helpful (0)
0

Q:
which touch controller it has ?

which touch controller it has ?
which touch controller it has ?

A:

File download: http://files.banggood.com/2017/12/2.8-spi-9341.zip

File download: http://files.banggood.com/2017/12/2.8-spi-9341.zip

Answered by Cheerful on 23/06/2020Helpful (0)
0

Q:
Hi, I have this TFT SPI Touch Display ILI9341, program Arduino 1.6.5., and developement board STM32F103C8T6. And I need initialize the display.I have program, but all Power Mode, MADCTL Mode is 0xFF !!! on output.WHERE I HAVE PROBLEM ?????my code is :#include <Adafruit_GFX.h> // this line I have added#include "SPI.h"#include "Adafruit_GFX_AS.h"#include "Adafruit_ILI9341_STM.h"// For the Adafruit shield, these are the default.#define TFT_DC PA0 // (Green) #define TFT_CS PA1 // (Orange) #define TFT_RST PA2 // (Yellow)// STM32 - TFT// 5v - VCC// GND - GND// PA0 - DC// PA1 - CS// PA2 - RST// PA5 - SCK// PA6 - MISO// PA7 - MOSI// 5v - LED AAdafruit_ILI9341_STM tft = Adafruit_ILI9341_STM(TFT_CS, TFT_DC, TFT_RST); // Use hardware SPI void setup() { Serial.begin(115200); Serial.println("ILI9341 Test!"); tft.begin(); // read diagnostics (optional but can help debug problems) uint8_t x = tft.readcommand8(ILI9341_RDMODE); Serial.print("Display Power Mode: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDMADCTL); Serial.print("MADCTL Mode: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDPIXFMT); Serial.print("Pixel Format: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDIMGFMT); Serial.print("Image Format: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDSELFDIAG); Serial.print("Self Diagnostic: 0x"); Serial.println(x, HEX); Serial.println(F("Benchmark Time (microseconds)")); Serial.print(F("Screen fill ")); Serial.println(testFillScreen()); delay(500); Serial.print(F("Text ")); Serial.println(testText()); delay(3000); Serial.print(F("Lines ")); Serial.println(testLines(ILI9341_CYAN)); delay(500); Serial.print(F("Horiz/Vert Lines ")); Serial.println(testFastLines(ILI9341_RED, ILI9341_BLUE));

Hi, I have this TFT SPI Touch Display ILI9341, program Arduino 1.6.5., and developement board STM32F103C8T6. And I need initialize the display.I have program, but all Power Mode, MADCTL Mode is 0xFF !!! on output.WHERE I HAVE PROBLEM ?????my code is :#include <Adafruit_GFX.h> // this line I have added#include "SPI.h"#include "Adafruit_GFX_AS.h"#include "Adafruit_ILI9341_STM.h"// For the Adafruit shield, these are the default.#define TFT_DC PA0 // (Green) #define TFT_CS PA1 // (Orange) #define TFT_RST PA2 // (Yellow)// STM32 - TFT// 5v - VCC// GND - GND// PA0 - DC// PA1 - CS// PA2 - RST// PA5 - SCK// PA6 - MISO// PA7 - MOSI// 5v - LED AAdafruit_ILI9341_STM tft = Adafruit_ILI9341_STM(TFT_CS, TFT_DC, TFT_RST); // Use hardware SPI void setup() { Serial.begin(115200); Serial.println("ILI9341 Test!"); tft.begin(); // read diagnostics (optional but can help debug problems) uint8_t x = tft.readcommand8(ILI9341_RDMODE); Serial.print("Display Power Mode: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDMADCTL); Serial.print("MADCTL Mode: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDPIXFMT); Serial.print("Pixel Format: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDIMGFMT); Serial.print("Image Format: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDSELFDIAG); Serial.print("Self Diagnostic: 0x"); Serial.println(x, HEX); Serial.println(F("Benchmark Time (microseconds)")); Serial.print(F("Screen fill ")); Serial.println(testFillScreen()); delay(500); Serial.print(F("Text ")); Serial.println(testText()); delay(3000); Serial.print(F("Lines ")); Serial.println(testLines(ILI9341_CYAN)); delay(500); Serial.print(F("Horiz/Vert Lines ")); Serial.println(testFastLines(ILI9341_RED, ILI9341_BLUE));
Hi, I have this TFT SPI Touch Display ILI9341, program Arduino 1.6.5., and developement board STM32F103C8T6. And I need initialize the display.I have program, but all Power Mode, MADCTL Mode is 0xFF !!! on output.WHERE I HAVE PROBLEM ?????my code is :#include <Adafruit_GFX.h> // this line I have added#include "SPI.h"#include "Adafruit_GFX_AS.h"#include "Adafruit_ILI9341_STM.h"// For the Adafruit shield, these are the default.#define TFT_DC PA0 // (Green) #define TFT_CS PA1 // (Orange) #define TFT_RST PA2 // (Yellow)// STM32 - TFT// 5v - VCC// GND - GND// PA0 - DC// PA1 - CS// PA2 - RST// PA5 - SCK// PA6 - MISO// PA7 - MOSI// 5v - LED AAdafruit_ILI9341_STM tft = Adafruit_ILI9341_STM(TFT_CS, TFT_DC, TFT_RST); // Use hardware SPI void setup() { Serial.begin(115200); Serial.println("ILI9341 Test!"); tft.begin(); // read diagnostics (optional but can help debug problems) uint8_t x = tft.readcommand8(ILI9341_RDMODE); Serial.print("Display Power Mode: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDMADCTL); Serial.print("MADCTL Mode: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDPIXFMT); Serial.print("Pixel Format: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDIMGFMT); Serial.print("Image Format: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDSELFDIAG); Serial.print("Self Diagnostic: 0x"); Serial.println(x, HEX); Serial.println(F("Benchmark Time (microseconds)")); Serial.print(F("Screen fill ")); Serial.println(testFillScreen()); delay(500); Serial.print(F("Text ")); Serial.println(testText()); delay(3000); Serial.print(F("Lines ")); Serial.println(testLines(ILI9341_CYAN)); delay(500); Serial.print(F("Horiz/Vert Lines ")); Serial.println(testFastLines(ILI9341_RED, ILI9341_BLUE));

A:

sorry I don't know the problem.

sorry I don't know the problem.

Answered by Thanatology on 25/05/2020Helpful (0)
0

Q:
can i use keil? instead of Arduino ide.

can i use keil? instead of Arduino ide.
can i use keil? instead of Arduino ide.

A:

Maybe you can try, but no tutorials and files.

Maybe you can try, but no tutorials and files.

Answered by Leepwas on 26/11/2019Helpful (0)
0

Q:
does it work with stm32. there is work around righ?

does it work with stm32. there is work around righ?
does it work with stm32. there is work around righ?

A:

It can work with stm32.

It can work with stm32.

Answered by Rosemarywas on 12/11/2019Helpful (0)
0

Q:
What does Jumper J1 do, on the v1.2 units?

What does Jumper J1 do, on the v1.2 units?
What does Jumper J1 do, on the v1.2 units?

A:

As mentioned previously, J1 appears to bypass what appears to be a 3.3V regulator. I say "appears to" as it doesn't do anything for me.

As mentioned previously, J1 appears to bypass what appears to be a 3.3V regulator. I say "appears to" as it doesn't do anything for me.

Answered by KnightFire on 08/06/2019Helpful (0)
0

Q:
Is this the MSP2907 or the MSP2906

Is this the MSP2907 or the MSP2906
Is this the MSP2907 or the MSP2906

A:

Driver IC: ILI9341

Driver IC: ILI9341

Answered by Vivi on 23/04/2019Helpful (0)
0

Q:
Will it work with Arduino UNO?

Will it work with Arduino UNO?
Will it work with Arduino UNO?

A:

it can work with Arduino UNO

it can work with Arduino UNO

Answered by Gamophobia on 12/04/2019Helpful (0)
0

Q:
It works with Arduino YUn? Thank you

It works with Arduino YUn? Thank you
It works with Arduino YUn? Thank you

A:

works

works

Answered by Procyonine on 25/03/2019Helpful (0)